Name: Constitutive Composite Matrix -Carbon Composite Fibre (en Inglés)
Price: 257.01 PEN
Availability: InStock
Author: Adapa, Narendra Kumar ; Varalakshmi, T. V. S.
ISBN: 9786200326133

portada Constitutive Composite Matrix -Carbon Composite Fibre (en Inglés)

Formato

Libro Físico

Autor

Narendra Kumar Adapa

T. V. S. Varalakshmi

Editorial

LAP Lambert Academic Publishing

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

22.9 x 15.2 x 0.6 cm

Peso

0.15 kg.

ISBN13

9786200326133

Categorías

Química industrial e ingeniería química

Constitutive Composite Matrix -Carbon Composite Fibre (en Inglés)

Narendra Kumar Adapa (Autor) · T. V. S. Varalakshmi (Autor) · LAP Lambert Academic Publishing · Tapa Blanda

Libro Nuevo

S/ 257,01

S/ 514,02

Ahorras: S/ 257,01

50% descuento

Envío normal

Origen: Estados Unidos (Costos de importación incluídos en el precio)

Se enviará desde nuestra bodega entre el Lunes 29 de Julio y el Lunes 12 de Agosto.

Lo recibirás en cualquier lugar de Perú entre 2 y 5 días hábiles luego del envío.

Reseña del libro "Constitutive Composite Matrix -Carbon Composite Fibre (en Inglés)"

The use of short pitch-based carbon fibers (0.05% of weight of cement, 0.189 vol. % Concrete), together with a dispersant, chemical agents and silica fume, in concrete with fine and coarse aggregates resulted in a flexural strength increase of 85%, and a flexural toughness increase of 205%, a compressive strength increase of 22%, and a material price increase of 39%. The slump was 4 in at a water/cement ratio of 0.50. The air content was 6%, so the freeze-thaw durability was increased, even in the absence of an air entertainer. The aggregate size had little effect on the above properties. The minimum carbon fiber content was 0.1 vol. %. The optimum fiber length was such that the mean fiber length decreased from 12 mm before mixing to 7 mm after mixing, which used a Hobart mixer. The drying shrinkage was decreased by up to 90%. The electrical resistivity was decreased by up to 83%.To investigate the effect of carbon fibres on M20 concrete. The parameters considered percentage of carbon fibres (0.1,0.5&0.1%) and three aspect ratios (50,75,100).Compressive strength, tensile strength are the two major properties are to be investigated.