Name: Study of Repetitive Corrugation and Straightening Process (en Inglés)
Price: 224.78 PEN
Availability: InStock
Author: Kumar, Sandeep ; Yadav, Amit ; Agarwal, Abhijeet
ISBN: 9786202309493

portada Study of Repetitive Corrugation and Straightening Process (en Inglés)

Formato

Libro Físico

Autor

Sandeep Kumar

Amit Yadav

Editorial

Scholars' Press

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

22.9 x 15.2 x 0.3 cm

Peso

0.10 kg.

ISBN13

9786202309493

Categorías

Ingeniería: general

Study of Repetitive Corrugation and Straightening Process (en Inglés)

Sandeep Kumar (Autor) · Amit Yadav (Autor) · Scholars' Press · Tapa Blanda

Libro Nuevo

S/ 224,78

S/ 449,56

Ahorras: S/ 224,78

50% descuento

Envío normal

Origen: Estados Unidos (Costos de importación incluídos en el precio)

Se enviará desde nuestra bodega entre el Lunes 12 de Agosto y el Lunes 26 de Agosto.

Lo recibirás en cualquier lugar de Perú entre 2 y 5 días hábiles luego del envío.

Reseña del libro "Study of Repetitive Corrugation and Straightening Process (en Inglés)"

Repetitive Corrugation and Straightening (RCS) process is one of the Severe Plastic Deformation (SPD) techniques which introduces a large amount of plastic deformation in a sheet workpiece without significantly changing its cross-sectional geometry. In present work experimentation and Finite Element (FE) study of Repetitive Corrugation and Straightening (RCS) process is being attempted. The work is done in two parts i.e. Finite Element Study and Experimentation work. In the Finite Element study, the effect of triangular and circular teeth effect has been studied and an intermediate teeth design is used. The teeth are of triangular in shape with a rounded top. Experimentation of RCS process is attempted with a 100mm x 100mm x 1 mm of Al6061 sheet. Experimentation was performed for three cycles of RCS process giving 90 Clockwise rotation along the perpendicular axis to the surface after each pass. Three mechanical tests were performed viz. Micro Hardness test, Tensile test and Stiffness test. To study the effect of the process these tests were performed on processed as well as unprocessed sheet sample. The hardness test shows an increase in hardness after every pass.