Name: Design, Construction and Installation of Solar Water Heater (en Inglés)
Price: 261.82 PEN
Availability: InStock
Author: Apodi, Joseph ; Braimah, Maurice Mustapha
ISBN: 9786139454860

portada Design, Construction and Installation of Solar Water Heater (en Inglés)

Formato

Libro Físico

Autor

Joseph Apodi

Maurice Mustapha Braimah

Editorial

LAP Lambert Academic Publishing

Idioma

Inglés

N° páginas

104

Encuadernación

Tapa Blanda

Dimensiones

22.9 x 15.2 x 0.6 cm

Peso

0.16 kg.

ISBN13

9786139454860

Categorías

Física

Design, Construction and Installation of Solar Water Heater (en Inglés)

Joseph Apodi (Autor) · Maurice Mustapha Braimah (Autor) · LAP Lambert Academic Publishing · Tapa Blanda

Libro Nuevo

S/ 261,82

S/ 523,64

Ahorras: S/ 261,82

50% descuento

Envío normal

Origen: Estados Unidos (Costos de importación incluídos en el precio)

Se enviará desde nuestra bodega entre el Lunes 12 de Agosto y el Lunes 26 de Agosto.

Lo recibirás en cualquier lugar de Perú entre 2 y 5 días hábiles luego del envío.

Reseña del libro "Design, Construction and Installation of Solar Water Heater (en Inglés)"

This report outlines systematic design of a solar water heating system for use in the Hotel, Catering and Institutional Management (H.C.I.M) Department of the Bolgatanga Polytechnic in the Upper East Region of Ghana and presents the results of calculations of the design parameters. A solar water heating system for domestic use has been designed and constructed using locally available materials. Solar energy is received by a flat-plate collector consisting of a thin absorber plate, integrated with underneath grids of fluid carrying tubes, and placed in an insulated casing with a transparent glass cover having a cold and a hot water tank integrated in the system. The radiation emitted by the sun is absorbed by the absorber plate and contained within it thereby increasing the temperature of the water in the tubes. The water gets heated and flows into a storage tank by the principle of thermosyphon system. A total amount of 50 liters of hot water was obtained representing 75 percent of hot water needs in the department. Maximum fluid output temperature of 80 oC, the collector temperature of 55 oC, ambient temperature of 37 C, and solar radiation of 4.61 KWh/m2/day, were obtained